FDNY CoF – Fuel-Oil Piping and Storage System (P-98) Practice Test

These questions are part of the practice quiz. Start practicing

• What is the requirement for labeling fuel oil storage tanks?
• What is the function of a fuel-oil filter?
• What is the maximum distance a container could drop that should be avoided?
• What is the restricted maximum amount of flammable gas that can be stored in any building in SCF?
• If you detect a fuel oil odor, what should you do?
• Storage handling and use of compressed flammable gas requires a permit when exceeding what volume in SCF?
• Why is it important to have a materials safety data sheet (MSDS) for fuel oil?
• What materials are commonly used for fuel oil piping?
• What is the typical capacity limit for a residential fuel oil tank?
• Which component is necessary for fuel oil tank venting?
• How should joints in fuel-oil piping be sealed?
• What is one key requirement when installing fuel oil piping?
• When must fuel oil systems be upgraded or reviewed for compliance?
• What should be done with unused or expired fuel oil?
• What is an important consideration for fuel-oil tank maintenance?
• What is the maximum angle at which the axis of gas containers can be inclined?
• What must be done when a fuel oil tank is decommissioned?
• Which of the following is essential to ensure safety in a fuel-oil piping system?
• Which training is not typically required for handling fuel-oil systems?
• What kind of training is necessary for personnel working with fuel-oil systems?
• What is a critical component of a spill response plan for fuel-oil storage?
• What is the purpose of a fuel oil storage tank's emergency vent?
• Which NFPA standard is primarily referenced for fuel oil storage systems?
• What is the primary risk of using unmarked compressed gas containers?
• Which of the following is a key safety consideration when working with fuel-oil systems?
• The storage of flammable gases must be reported in accordance with which municipal law?
• How often should fuel-oil storage tanks be inspected?
• What is one effective way to reduce the risk of fuel oil spills?
• When are containers allowed to be stored horizontally?
• What is a common cause of fuel oil leaks?
• What is the maximum percentage for a flammable gas to be ignitable?
• How can improper fuel-oil storage indirectly affect human health?
• What material is most commonly used for fuel-oil piping?
• What valve must be opened manually?
• What emergency equipment should be available near fuel oil storage areas?
• Incompatible materials in storage should be isolated by a partition that is at least how many inches above the stored materials?
• At approximately what temperature can fuel oil ignite?
• What is the maximum allowable height for a fuel oil storage tank?
• What is the primary reason for ensuring proper ventilation in fuel-oil storage facilities?
• What should be prominently posted in gas container storage areas?
• What is the regulated volume at which the handling or use of compressed flammable gas requires a permit?
• Name one common cause of fuel-oil combustion inefficiency.
• What is the maximum surface temperature that containers may be heated to?
• What is the purpose of isolating incompatible materials in storage?
• What is an important aspect of fuel oil system design?
• When was the new fire code adopted in New York City?
• What must be done if a fuel oil tank is found to be leaking?
• What is a key requirement for fuel oil storage tank installation?
• What describes the transferability of permits?
• In what situation should a fuel oil tank be upgraded or replaced?
• At what pressure must a gas be considered compressed at 68F?
• At what pressure is a gas considered compressed according to the guidelines?
• What emergency action must be taken in case of a fuel oil fire?
• What is the importance of leak detection in fuel oil systems?
• What should not be solely relied upon to identify the contents of a compressed gas container?
• What is the minimum distance markings shall be provided throughout the piping run?
• What is the primary role of a fuel oil filtration system?
• Handling and use of non-piped medical gas systems must be supervised by which type of certificate holder?
• What is the maximum allowable distance for a fuel oil storage tank from a building?
• How can a fuel oil tank be monitored for water accumulation?
• What should be the condition of fuel oil when stored?
• How often should supplemental fueling equipment be inspected?
• When is a fuel oil tank considered to be safe for use?
• What is the purpose of a fuel-oil vent?
• Which action is prohibited when handling cylinders?
• What must be removed from the container before transportation?
• What should workers do if they identify a leak in the fuel-oil system?
• A permanent site-specific permit is valid for how many months?
• What action must be taken in regards to fuel oil system installations?
• A "+" sign on a cylinder indicates it qualifies for what percentage overfill?
• Which gas is known to smell like garlic?
• What is the legal minimum distance required between a fuel-oil tank and a property line?
• What is a preventative measure for avoiding fuel oil leaks?
• What is one of the risks posed by flammable vapors in fuel oil systems?
• The intent of signage regarding hazardous materials is to indicate the type and degree of what?
• When is secondary containment required for fuel-oil systems?
• How are fuel oil piping systems typically tested for leaks?
• Which of the following is a requirement for the operation of flammable gas storage?
• What do you need to avoid using in compressed gas containers?
• Why is it important to properly label fuel-oil piping?
• What is bulk fuel storage?
• What is a common issue that can occur with fuel-oil piping over time?
• What is the purpose of a fuel-oil storage tank vent?
• Which item is essential for conducting regular inspections of fuel oil systems?
• The triggering amount for the sign requirement corresponds to the amount needed for what?
• What design feature helps prevent spills during fuel transfer?
• Piping systems shall consist of what type of information about the contents?
• What is the function of a ball valve in a fuel oil system?
• What is the maximum quantity of SCF of gas allowed per floor at construction sites?
• Who is responsible for performing the transfer of non-flammable compressed gases?
• A star stamp on a compressed gas cylinder indicates it meets the requirements for how many years of retest?
• Which holder must personally supervise the use of non-piped medical gas systems?
• Which materials are commonly used for fuel-oil piping?
• What is the minimum clearance requirement from a fuel oil tank to a property line?
• In which scenario can the heating devices be considered safe for containers?
• How must the control valves be opened?
• What is a fundamental characteristic of flammable materials?
• What gas is characterized by a sweet odor?
• What is the role of a fuel oil monitoring system?
• How does temperature affect fuel oil during storage?
• How much capacity must incompatible materials have to be separated?
• Which factor is essential when determining the storage method for compressed gas containers?
• What component is critical for monitoring fuel levels in tanks?
• Overnight storage is prohibited with which type of permit?
• Compressed gas containers must be separated based on what criteria?
• What is the purpose of a fuel oil gauge?
• What is one advantage of using polymer materials in fuel-oil piping?
• Which installation method dramatically reduces the risk of ground contamination?
• When can fuel-oil systems be pressurized during testing?
• What is the primary code referenced for fuel-oil piping systems?
• A compressed gas is a material that is a gas at what temperature in degrees Fahrenheit?
• What should not be interchanged between different sizes?
• What should be done if a fuel oil spill is suspected?
• What is the minimum clearance required around fuel-oil piping?
• Which type of plants are exceptions to the markings requirement?
• Who must generally supervise the storage of compressed gases?
• What practice is recommended for keeping fuel oil storage tanks clean?
• What should be done with gas-manufacturing plants regarding markings?
• How should fuel oil spills be treated?
• What system component ensures that the tank does not overfill?
• What is the ideal length for hoses to protect them from damage?
• Which piece of safety equipment is essential when working with fuel oil?
• What type of tank is commonly used for underground fuel oil storage?
• What classes require excess flow control or approved means of leak detection above 15 PSI?
• How far should combustible waste and vegetation be kept from compressed gas containers?
• What is a critical factor in selecting a location for fuel-oil storage tanks?
• What is the purpose of a shutoff valve in a fuel-oil system?
• What is an essential characteristic of the dike or containment area around a fuel-oil storage tank?
• Identify a common type of flexible piping used for fuel-oil delivery.
• Why is it crucial to maintain records of inspections and maintenance for fuel-oil systems?
• What is a recommended practice to minimize spills during fuel transfer?
• What type of hazard is associated with improper handling of fuel oil?
• What action should be avoided with regulators between different sizes?
• What is the maximum allowable size for a residential fuel-oil storage tank?
• What is the role of regulations in managing fuel oil systems?
• Which regulatory aspect is crucial for safe fuel-oil storage?
• What precautions should be taken when installing fuel-oil piping underground?
• What is the first action to take in response to a large fuel-oil spill?
• A citywide permit is valid for operations at multiple locations for up to how many days?
• Temporary permits may be valid from one day to what maximum duration?
• What kind of ground surface is acceptable for fuel oil storage tanks?
• What aspect of hose management is critical for safety?
• How far from the building should fuel-oil storage tanks typically be located?
• What is the primary role of a fuel-oil pump in the system?
• Which of the following is NOT included in the requirements for compressed gas container safety?
• What training is required for staff managing fuel oil systems?
• What is the primary role of the fire department in regards to fuel-oil systems?
• What percentage of a non-flammable gas mixture with air shows no flammable range at 14.7 PSIA?
• What should be done prior to starting work on a fuel oil system?
• Which is not a part of fuel oil system maintenance?
• Partially full compressed gas containers containing residual gases shall be considered what for the purposes of controls required?
• What is one preventive measure to reduce the risk of fuel oil leaks in a system?
• What materials are prohibited in the construction of fuel oil storage tanks?
• What is the main function of a fuel-oil sensing line?
• Which accessory is commonly included in fuel-oil systems to improve safety?
• What should be done if a fuel-oil leak is detected?
• What regulatory body oversees the safety of fuel oil storage and pipeline systems?
• What is the minimum thickness of steel required for gas cabinets?
• Cylinder tare weight refers to the weight of the cylinder plus what?
• Why is it important to use proper fittings in fuel-oil piping?
• What might indicate a safety standard compliance on a gas cylinder?
• What preventative measure can be taken to protect against fuel oil fires?
• Which of the following is a preventive measure against vapors in fuel-oil storage?
• What is the primary reason for pressure relief devices to discharge upward and unobstructed?
• Who will appear on the neck ring of a compressed gas cylinder?
• What is a common maintenance task for fuel-oil piping systems?
• What must not be obstructed when nesting cylinders at a seller's warehouse?
• Inadequate lighting during the handling of gas systems can lead to which of the following?
• Why should incompatible materials be separated in storage?
• What is the first step before using a gas container?
• Who is responsible for ensuring fuel oil systems comply with safety regulations?
• What is essential to ensure during the storage of gas containers?
• Fuel oil systems require which of the following for optimal operation?
• When is it acceptable to open the container valve?
• How can fuel oil storage facilities reduce the risk of incidents?
• How far away must compressed gas containers be kept from ordinary electrical equipment?
• What type of valve is commonly used in fuel oil piping systems to prevent backflow?
• The transportation of hazardous materials requires compliance with what type of placards?
• What does the term “spillage containment” refer to?
• What is essential for maintaining safety in fuel oil systems?
• How should the markings on a compressed gas container be?
• What is the function of a fuel-oil expansion tank?
• Compressed gas containers are not to be used for which purpose?
• What is the maximum number of containers that can be stored in a single gas cabinet?
• What is the correct slope for fuel-oil piping?
• Which type of permit is valid for a specific location only?
• What is the minimum distance in feet that compressed gas containers should be kept from air conditioning units?
• What should be installed at the base of a fuel-oil storage tank to prevent leaks?
• What must be done to the container valve in a hazardous materials operation?
• What are potential environmental consequences of improper fuel-oil storage?
• What is the minimum distance to segregate incompatible materials in storage?
• What is a fuel oil transfer pump’s primary function?
• What is the maximum percentage of a mixture in which non-flammable gases are not ignitable at 14.7 PSIA?
• Non-flammable gases do not have a flammable range with air of at least what percentage at 14.7 PSIA?
• How is the compatibility of piping materials with fuel oil verified?
• How should gas containers be grouped?
• What is a characteristic of hazardous material signage?
• What type of valve should be kept closed at all times?
• What type of training is essential for workers handling fuel-oil systems?
• Where is the refilling of compressed flammable gas containers strictly prohibited?
• Which agency enforces regulations related to fuel oil storage and handling in New York City?
• What is the significance of the “double-wall” tank design?
• Which organization provides guidance and standards for the storage and handling of fuel oils?
• What is the key requirement when transferring compressed gases?
• What should be done with charged and empty containers?
• What is a potential environmental impact of leaking fuel oil?
• Before a gas container can be used, what must be attached to each of the control valves?
• Which type of handles should not be removed or altered to hinder operation?
• Why is it important to monitor the temperature of fuel oil?
• What should you always check before using a compressed gas container?
• What is a common method for detecting a fuel-oil leak underground?
• What must all fuel oil piping joints have to ensure they are leak-proof?
• Why is it important to have emergency shutoff protocols for fuel-oil systems?
• What type of system should be installed to monitor for leaks in fuel-oil storage tanks?
• What is the primary hazard of improper fuel oil storage?
• What does the acronym "NFPA" stand for?
• What does the term “egress” refer to in the context of cylinder storage?
• What is the primary purpose of the FDNY Certificate of Fitness for Fuel-Oil Piping and Storage Systems?
• All pressure relief devices must be designed to work effectively under what condition?
• Which gas is recognized by its rotten egg smell?
• What should be included in the maintenance log for fuel oil systems?
• What type of monitoring enhances the safety of double-walled tanks?
• What is the maximum duration for a temporary permit?
• Which regulation is applicable to fuel-oil storage for spill prevention?
• How does temperature affect fuel oil storage?
• What emergency equipment is essential near fuel-oil storage?
• Which of the following statements is true regarding fuel oil piping systems?
• What should gas container storage areas display?
• What must be ensured absolutely before opening the gas container valve?
• What type of valve is used to prevent backflow in fuel-oil systems?
• Why are earthquake-resistant features important for fuel-oil tanks?
• What should be done if a fuel-oil leak is detected?
• What is the risk of not properly labeling gas storage areas?
• What type of lighting should be provided for the handling and use of compressed gas containers and systems?
• What is the purpose of an isolation valve in a fuel oil piping system?
• In which conditions should fuel oil storage systems operate?
• What type of materials should not be used for fuel-oil piping?
• What is the standard color for piping used for fuel oil?
• What type of signs must be posted at the entrance to rooms or on cabinets containing compressed gases?
• How often should the COF holder inspect for ignition sources?
• What should be inspected regularly in a fuel-oil piping system to ensure safety?
• What is the primary cause of fuel-oil leaks in piping systems?
• What is the primary function of a fuel-oil piping system?